Post reply

Welcome to PogoCheats Forum.
Log in
Sign up

PogoCheats CommunityDownload Cheats | Club Center | Pogo Help
Pogi Constellations | Anagram Solver
Pogo Daily Checklist

November 10, 2025, 09:13:06 PM

This week's Club Pogo challenges!
Jet Set Solitaire : Win 40 games this week!
Lucky Cat Bingo : Daub 200 Lucky Cat cells this week!
Mahjong Garden HD : Match identical flower tiles 40 times this week!

Main Menu

Post reply

The message has the following error or errors that must be corrected before continuing:: Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it has been approved by a moderator.

Name
Email
Subject

[quote author=Shady Lady link=msg=130806 date=1140083763]
[center][b][size=16pt][color=Red]MAKING YOUR OWN GLITTER FILES[/color][/size][/b][/center]

[b][size=12pt]STEP 1: GETTING THE PROGRAMS AND FILES NEEDED[/size][/b]

Go here and download a free trial version of PSP 8 and the resource packs
[url]http://www.jasc.com/products/trialreg.asp?pid=k-psp8-usdir[/url]

Go here and download a free trial version of Animation Shop 
[url]http://www.corel.com/servlet/Satellite?pagename=Corel3/Downloads/Trials[/url]

Once you've installed the above programs... click on this link to install the filters. I saved it to my Received Files folder. Then opened it and copied the VisMan folder to C:/Program Files/Jasc Software Inc/Paint Shop Pro 8/Plugins

[url]http://www.photoshop-filters.com/downloads/visman/visman.zip[/url]

To see what these filters do go to: [url]http://www.photoshop-filters.com/html/visman.htm[/url]

[url]http://www.corel.com/servlet/Satellite?pagename=Corel3/Home[/url]
Click on Communities here you get your picture tubes. They will go in your PSP Picture Tubes file.

I haven't had any trouble with spyware/popups from downloading these trials.

These 2 programs and files are what you will use to make your glitter files.

[b][size=12pt]STEP 2: MAKING A SIMPLE GLITTER FILE[/size][/b]

1: Open Paint Shop Pro
2: Click on [b]New[/b] (little picture of a sheet of paper) 
    Settings should be :

[center][url=https://img7.imageshack.us/img7/8411/newimage6yp.jpg][img width=162 height=250]https://img7.imageshack.us/img7/8411/newimage6yp.jpg[/img][/url]
Click for Larger Image[/center]

Size- [b]ANY[/b] -I am using 200x290 Pixels for the tutorial since this is the size picture being used in glittering part of a picture coming later.
*Be sure [b]Transparent[/b] is checked.

3: Click on [b]Flood Fill Tool[/b] (Looks like a tilted paint can)
 If your tools toolbar isn't showing, Click on View: Toolbars: Tools

4: Now choose your color and click on the picture until it's completly covered (all the white and grey squares gone).

[center][url=https://img95.imageshack.us/img95/5359/colorchoice9gs.jpg][img width=87 height=250]https://img95.imageshack.us/img95/5359/colorchoice9gs.jpg[/img][/url]
Click for Larger Image[/center]

I used #C70912 for this tutorial. By clicking on the swatch(square that is red in the image above) a window will open where you can type in the #.

5: Click on [b]Edit[/b] then click on [b]Copy[/b]. Now Click on [b]Edit[/b] again and click on [b]Paste as New Image[/b]. [b]Repeat[/b]
Click on [b]Window[/b] and [b]Cascade[/b].
You will now have [size=12pt][b]3[/b][/size] copies of the image

[center][url=https://img87.imageshack.us/img87/1029/3images1of.jpg][img width=492 height=250]https://img87.imageshack.us/img87/1029/3images1of.jpg[/img][/url]
Click for Larger Image[/center]

6:  Click on [b]Image Copy 1[/b]. Now Click on [b]Adjust[/b]. Then, click on [b]Add/Remove Noise[/b]. Now click on [b]Add Noise[/b]

[center][url=https://img95.imageshack.us/img95/7686/addnoise6cz.jpg][img width=192 height=250]https://img95.imageshack.us/img95/7686/addnoise6cz.jpg[/img][/url]
Click for Larger Image[/center]

For Copy 1 I used Random 50% Monochrome checked

7: If you do [b]NOT[/b] wish to add glitter, Click on [b]File[/b]. Then, [b]Export[/b]. Then, [b]JPEG Optimizer[/b].
Be sure [b]Chroma Subsampling[/b] is set to [b]none[/b]
Click OK and save as [b]Image 1[/b]. You can close copy 1 you are done with it.

[center][url=https://img87.imageshack.us/img87/7287/jpegoptimizer6ad.jpg][img width=212 height=250]https://img87.imageshack.us/img87/7287/jpegoptimizer6ad.jpg[/img][/url]
Click for Larger Image[/center]

8: Repeat Step 6 and 7 Using Image [b]Copy 2[/b] and saving as [b]Image 2[/b]
For Copy 2 I used Random 70% Monochrome checked

9: Repeat Step 6 & 7 Using Image [b]Copy 3[/b] and saving as [b]Image 3[/b]
For Copy 3 I used Random 90% Monochrome checked

You can skip Step 3 if you don't want to add sparkles or other objects to your glitter.

[b][size=12pt]STEP 3: ADDING SPARKLE TO THE GLITTER[/size][/b]

1. Click on the [b]Picture Tube Tool[/b] Button.

[center][url=https://img96.imageshack.us/img96/4800/picturetubetool9fq.jpg][img]https://img96.imageshack.us/img96/4800/picturetubetool9fq.jpg[/img][/url][/center]

[b]Settings:[/b]
I used Scale 50, 40, and 25 to make the sparkles on each image.
These are the choices I used:

If you don't see this bar, click on F4.
[center][url=https://img96.imageshack.us/img96/4524/picturetubesettings9yh.jpg][img width=500 height=40]https://img96.imageshack.us/img96/4524/picturetubesettings9yh.jpg[/img][/url]
Click For Larger Image[/center]

2. With Scale set to 50 click randomly on the glitter image 1.
Change Scale to 40 and click randomly again.
Change Scale to 25 and click again.

[center][url=https://img96.imageshack.us/img96/7431/red18qj.jpg][img width=185 height=250]https://img96.imageshack.us/img96/7431/red18qj.jpg[/img][/url][/center]

Remember, you're going to add more sparkles in the next 2 frames.
3. Select Image 2 and repeat Step 2
4. Select Image 3 and repeat Step 2

5. Now Click on windows and tile Vertically
Look to see if there are any large areas that have no sparkles in any of the frames. Don't forget your edges.

[center][url=https://img78.imageshack.us/img78/5128/3imagessparkle3sx.jpg][img width=434 height=250]https://img78.imageshack.us/img78/5128/3imagessparkle3sx.jpg[/img][/url][/center]

6.  Select [b]Image 1[/b]
Click on [b]File[/b]. Then, [b]Export[/b]. Then, [b]JPEG Optimizer[/b].
Be sure [b]Chroma Subsampling[/b] is set to [b]none[/b]
Click OK and save as [b]Image 1S[/b].

7. Select [b]Image 2[/b]
Repeat #8 Saving as Image 2S

8. Select [b]Image 3[/b]
Repeat #8 Saving as Image 3S

[b][size=12pt]STEP 4: LET'S ANIMATE THE GLITTER[/size][/b]

1: Open Animation Shop
2: Click on [b]Animation Wizard[/b] button

[center][url=https://img95.imageshack.us/img95/3029/animationwizard2ui.jpg][img]https://img95.imageshack.us/img95/3029/animationwizard2ui.jpg[/img][/url]
Click for Larger image[/center]

3: [b]Wizard Choices[/b]
Same as the first image frame ... click next
Transparent ... click next
Upper Left corner of the frame  With preceding frames contents ... click next

[center][url=https://img38.imageshack.us/img38/751/wizard18qy.jpg][img width=327 height=250]https://img38.imageshack.us/img38/751/wizard18qy.jpg[/img][/url]
Click for Larger Image[/center]

Yes, Repeat the animation indefinitely ... click next
How Long do you want each frame to be displayed? 10 ... click next
Add Image ...  Click on Image 1 Click and hold the ctrl key and click on Image 2 and Image 3 Click Open ... make sure they are in order 1,2, 3 ... click next

[center][url=https://img38.imageshack.us/img38/3279/addimage5pk.jpg][img width=323 height=250]https://img38.imageshack.us/img38/3279/addimage5pk.jpg[/img][/url]
Click for Larger image[/center]

Click Finish

[center][url=https://img90.imageshack.us/img90/1142/animationframes0yn.jpg][img width=412 height=250]https://img90.imageshack.us/img90/1142/animationframes0yn.jpg[/img][/url]
Click for Larger image[/center]

4: Click on the [b]View Animation Button[/b]

[center][url=https://img90.imageshack.us/img90/157/animationbuttton1wh.jpg][img]https://img90.imageshack.us/img90/157/animationbuttton1wh.jpg[/img][/url]
Click for Larger image[/center]

5: Click on [b]File[/b]. Then, [b]Save As[/b]
Pick a file name and save as a [b]gif[/b] file
click next until done using default settings

[center][url=https://img90.imageshack.us/img90/2082/1red200x2904ql.gif][img width=172 height=250]https://img90.imageshack.us/img90/2082/1red200x2904ql.gif[/img][/url] [url=https://img78.imageshack.us/img78/4921/redglitter34bw.gif][img width=172 height=250]https://img78.imageshack.us/img78/4921/redglitter34bw.gif[/img][/url]
Click for Larger image[/center]

That's it. You now have a glitter you can use.

By Selecting different Picture Tubes you can get different sparkles and objects.

[center][url=https://img97.imageshack.us/img97/8459/redhearts14yb.gif][img]https://img97.imageshack.us/img97/8459/redhearts14yb.gif[/img][/url][/center]

[center][url=https://img97.imageshack.us/img97/4674/redglitter26ih.gif][img width=172 height=250]https://img97.imageshack.us/img97/4674/redglitter26ih.gif[/img][/url][/center]

I hope you've enjoyed making glitter files.
[/quote]

Other options

Return to this topic
Don't use smileys

Verification:

Please leave this box empty:

Shortcuts: ALT+S post or ALT+P preview

Topic summary

Posted by Shady Lady

- May 05, 2006, 12:36:32 AM

MAKING SPARKLES

STEP 1: New Image

1. Open a new square image. I used 300 X 300 for this tutorial.

2. Using the Flood Fill tool

make it Black .

STEP 2: Getting Started

1. Add a new Raster Layer

2. On the new layer, draw a white horizontal ellipse (or any color you want) using the Preset Shapes Tool.

Setting: Antialias ... Checked

The width of this ellipse and the amount of deformation in the next step will affect the width of your sparkles. Adjust both to what you like.

Click for Larger Image

STEP 3: Deformation

1. Click on Effects. Select Geometric Effects. Then select Perspective Horizontal.

Settings:
Distortion ... 100
Edge Mode ... Transparent

Click For Larger Image

Click for Larger Image

STEP 4: Mirror

1. Click on the Mirror Button

OR Click on Image. Then select Mirror.

Click For Larger Image

2. Repeat step 3 using the same settings.

Click for Larger Image

3. Deform the image again by repeating Step 3 using the new settings.

Settings:
Distortion ... 85 or to the thickness you want your sparkle to be
Edge Mode ... Transparent

Click for Larger Image

4. Mirror and repeat using the new settings again.

Click for Larger Image

STEP 5: Copy & Rotate

1. Click Ctrl + C. Then, Click Ctrl + L
OR Click on Edit. Then select Copy. Now, Click on Edit. Then select Paste and select As A New Layer.

2. Click the Free Rotate Button

OR Click on Image. Then select Rotate. Then, Free Rotate.

Settings:
Degrees ... 90
Direction ... Right or Left has no effect
All boxes ... Unchecked

Click for Larger Image

3. If you want a Cross Sparkle, skip step 6.

STEP 6: Adding More

1. Click Ctrl + C. Then, Click Ctrl + L
OR Click on Edit. Then select Copy. Now, Click on Edit. Then select Paste and select As A New Layer.

2. Click the Free Rotate Button

OR Click on Image. Then select Rotate. Then, Free Rotate.

Settings:
Degrees ... 45
Direction ... Right or Left. Will use the opposite for the next one.
All boxes ... Unchecked

Click for Larger Image

3. If you want these a little shorter than the vertical or horizontal ones, resize them by Clicking on the Image Resize button

OR Click on Image. Then select, Resize.

Settings:
Pixel Dimensions ... 75 percent or any size you like
Check ... Lock Aspect Ratio
Uncheck ... Resize all Layers

Click for Larger Image

4. Click Ctrl + C. Then, Click Ctrl + L
OR Click on Edit. Then select Copy. Now, Click on Edit. Then select Paste and select As A New Layer.

5. Click on the Mirror Button

OR Click on Image. Then select Mirror.

Click for Larger Image

STEP 7: Getting Rid of the Black

1. In your Layer Palette, click on the layer that you made black.

Click for Larger Image

2. Click on the Delete Layer Button

OR Right click on the Layer in the palette and click on delete.

STEP 8: Merge and Touch Up

1. Right click on any of your layers in your layer palette. Then, select Merge and Merge Visible.
OR Click on Layers, and select Merge and Merge Visible

2. Zoom in on your image to make sure you don't have any grey spots on it. If you do, use your paint brush tool

and carefully paint them.

Click for Large Image

3. Colorize the sparkle any way you like. I like to use the adjust HSL button

For very bright white, Adjust and use maximum whiteness and brightness.

STEP 9: Resize and Save

1. Click on on the Image Resize button

OR Click on Image. Then select, Resize.

Settings:
Pixel Dimensions ... 50 percent or any size you like
Check ... Lock Aspect Ratio
Check or Uncheck ... Resize all Layers ... You only have 1 layer now so it doesn't affect it.

2. Click Ctrl + C. Then, Click Ctrl +V
OR Click on Edit. Then select Copy. Now, Click on Edit. Then select Paste and select As A New Image.

3. Click on File and Select Export, then Picture Tube. Pick a name for your Sparkle. Default settings are ok.

It is now available when you click on your Picture Tube Tool Button

You can add a Glow effect to the Sparkle by adding a New Layer and dragging that below the first layer in your layer pallete. Then use the Airbrush Tool

to put a round circle.

Click for Larger Image

You can make different sparkles by using a diamond instead of an ellipse and/or using pinch deformation instead of horizontal perspective.

Have fun and experiment! Shady

Posted by Shady Lady

- March 30, 2006, 01:25:38 PM

ADDING GLITTER TO AN ANIMATION TUTORIAL NOW COMPLETE

Posted by Shady Lady

- March 28, 2006, 08:00:34 PM

ADDING GLITTER TO AN ANIMATION

STEP 1: SELECTING AN ANIMATION

TIPS:
1. Use an animation with minimal movement or 4 or fewer frames until you get the basics of adding glitter to the images. You will need to select the area you want to add glitter to on each frame separately.

2. Use an animation that has colors that are easy to select. As you master selecting using the different tools then use animations that has many colors or colors that are similar.

The image used for this tutorial:

STEP 2: ANIMATION SHOP

1. Open the image you want to use in animation shop.
2. Press Ctrl + A to select all the frames.
3. Press Ctrl + C to copy all the frames.

STEP 3: PSP

1. Open PSP
2. Click on Edit, then select Paste. Next select As Animation As Multiple Images

STEP 4: SELECTING PARTS OF THE IMAGE TO ADD GLITTER TO

1. Click on the Magic Wand Tool

. You will have to adjust the tolerance so that you can get the parts of parts of the image you want to glitter.

For this image settings are 60% tolerance, Mode is Add(Shift)

CLICK TO SEE LARGER IMAGE

2. Click on the image where you want to add glitter.
TIPS:
If you need to adjust the tolerance to get the parts you want selected. I would do all of that part of the image in all the frames with the same tolerance setting. Then, go back to image 1 and change the tolerance. Select the part of the image that needs that tolerance setting. Then do the other frames using that tolerance. Repeat until you have what you want selected.

You can also use Ctrl + Shift + I to select the opposite part of the image. You can use this to switch back and forth to get the parts you want selected.

Press the S to use the Selection Tool

. You can use this to select parts to glitter also.
3. Repeat #2 for all other frames in the animation.

4. Make 3 copies of each frame by clicking on each frame and clicking Shift +D 2 times. For this image you will end up with 12 frames.

STEP 5: ADDING NOISE

1. Go to image 1. Click on Adjust. Then, click on Add/Remove Noise. Now click on Add Noise. Do this for both copies also changing the noise amount.

Settings: For this image I used 30, 35, 40% noise with Gaussian and Monochrome checked.

CLICK FOR LARGER IMAGE

2. Repeat #1 for all the frames in the animation.

STEP 6: SAVING EACH COPY

1.Click on File. Then, Export. Then, GIF Optimizer.
Make sure exsisting image or layer transparency is checked.

2. Repeat #1 for each all copies of all the frames.

STEP 7: ANIMATION SHOP
1. Open Animation Shop.

2. Click on Animation Wizard button

3: Wizard Choices
Same as the first image frame ... click next
Transparent ... click next
Upper Left corner of the frame With preceding frames contents ... click next
Yes, Repeat the animation indefinitely ... click next
How Long do you want each frame to be displayed? 10 or adjust to suit your animation ... click next
Add Image ... Click on frame 1 Click and hold the ctrl key and click on the other frames in the animation. Click Open ... make sure they are in order 1,2, 3 ... click next

4. Click Finish.

5. Click on the View Animation Button

If it is what you want, Click on File. Then, Save As
Pick a file name and save as a gif file. You are done.

If it's not, go to step 8.

STEP 8: MAKING ADJUSTMENTS TO THE ANIMATION

1. If the glitter isn't moving enough or to much, press ctrl + A to select all the frames. Then press Alt + enter to adjust the frame properties. Here adjust the display time.

2. Another adjustment you can make is to duplicate frames. Select the frame(s) you want to duplicate. Press Ctrl + C. Select the frame you want it to come after and press Ctrl + Shift + L

For this image I selected the first 3 frames by clicking on frame 1 holding down the shift key and clicking on the 3rd frame. I then pressed Ctrl + C. Clicked on frame 3 and pressed Ctrl + Shift + L to paste the 3 frames after frame 3. I pasted the frames 4 times. When done I had 24 frames.

The first image is the original, Second without adding the extra frames, Third final with adding the frames.
By adding the frames instead of slowing down the delay time it keeps the glitter moving and slows down the eye blinking.

I hope you have enjoyed this tutorial.

Posted by Tara

- March 25, 2006, 04:13:23 AM

Aweee little puff people...how cute... O0

Posted by Shady Lady

- March 25, 2006, 12:03:55 AM

FOLLOW UP ON PUFF PEOPLE TUTORIAL

Here's so samples of other things that can be done with the puff people:

Here's some different colors:

Here's were they came from and where to find more information about them.

Posted by Shady Lady

- March 23, 2006, 11:58:15 PM

Great Job Cowboy! :D

Posted by cowboy63

- March 23, 2006, 05:54:18 PM

O0

Ty Ty Tokens it was my first try. Spent all day figuring out how to do it but the Tutorials helped a lot!

:D

Posted by TmT

- March 23, 2006, 04:47:47 PM

Quote from: cowboy63 on March 23, 2006, 04:05:31 PM
:(

Since there was not a thread about non glitter animated sigs, I did not want to start one just to test mine. I hope this is alright. ;)

Lookz Great!!, Cowboy.... very nice job!!

Posted by cowboy63

- March 23, 2006, 04:10:03 PM

:D

Thanks to everyone with their tips. Without them I could not have done it. O0

Posted by cowboy63

- March 23, 2006, 04:05:31 PM

:(

Since there was not a thread about non glitter animated sigs, I did not want to start one just to test mine. I hope this is alright. ;)

Posted by TmT

- February 26, 2006, 07:00:38 PM

lol tyvm...

Posted by hades

- February 25, 2006, 04:43:53 PM

lmao that mooning one is funny ;D

Posted by TmT

- February 25, 2006, 08:03:55 AM

would help if i upload right image

Posted by TmT

- February 25, 2006, 08:00:54 AM

both images were done completely the same... nothing was altered...NOTHING!! but the background... and once upload it via photobucket...it even <transparent>resize image automatically

I need a tutor... for this tutorial... I dont have much hair left to pull out

Posted by TmT

- February 25, 2006, 07:58:35 AM

Pulling my hair out.... by the hand full... <rofl> I give up on this tutorial... itz kickin my arsenal... <cant say real word>

ok with white bg

transparent bg

(the gif do not get so dark until Animation Shop --step save take it thru a 2nd optomize--) and it comes out horrible